Peerless Industries KX-TDA15 Outgoing intercom, Call Log-in/Log-out, Status ARS dial, Caller’s

		1.25 Administrative Information Output Features
Number in
the	Item	Description
Pattern

(7)Duration Shows the duration of the trunk call in Hours/Minutes/ Seconds.

(8)Acc Code Shows the account code appended to the call. ( 1.5.4.3

(Account Account Code Entry)

Code)

(9)	CD	Shows other call information with the following codes:
	(Condition	CL: Collect call
	Code)	TR: Transfer
		FW: FWD to trunk
		D0: Call using DISA or TIE line service
		RM: Remote maintenance (modem) ( 2.3.1 PC
		Programming)
		NA: Not answered call
		RC: Received call
		AN: Answered call
(10)	Cost	Shows the call charge.

[Programmable Items]

Item	Description
Outgoing trunk call	Controls whether the outgoing trunk calls are shown. This
	setting is common throughout the PBX (	SMDR Outgoing
	Call Printing [804]). COS programming is also required.
Incoming trunk call	Controls whether the incoming trunk calls are shown (
	SMDR Incoming Call Printing [805]).
Outgoing intercom	Controls whether the outgoing intercom calls are recorded.
call
Log-in/Log-out	Controls whether the log-in/log-out status is recorded.
status
ARS dial	Controls whether the user-dialled number or the modified
	number is shown.
	The Host PBX Access code ("=" followed by the access code)
	can be shown (as supplementary information) only when the
	modified number is selected in this setting. (	1.9.1 Automatic
	Route Selection (ARS))
Caller’s	Controls whether the caller’s identification number, name,
identification	number and name, or nothing is shown. If "none" is selected,
	<I> will not be shown.
DID/DDI number	Controls whether the DID/DDI number, name, number and
	name, or nothing is shown. If "none" is selected, <D> will not
	be shown.

Feature Guide 233