![](/images/new-backgrounds/1309163/309163307x1.webp)
1.16 Optional Device Features
Security | Intercom | TIE Line Call |
| ||
|
| Trunk Call | |||
Without PBX | With PBX | ||||
Mode | Call | ||||
| |||||
|
| Code | Code |
| |
|
|
|
|
| |
All |
|
|
|
| |
Security |
|
|
|
| |
|
|
|
|
| |
Trunk |
|
|
|
| |
Security |
|
|
|
| |
|
|
|
|
| |
No |
|
|
| * | |
Security |
|
|
| ||
|
|
|
| ||
|
|
|
|
|
: Available
*: If trunk call is available, Account Code Entry ( 1.5.4.3 Account Code Entry) is also available.
Note
DISA AA service and Operator Call ( 2.2.5 Operator Features) are available for any security mode.
Security Mode Override:
If the caller operates with the following features while hearing a DISA message, the security mode can be changed to the No Security mode temporarily:
•Walking COS ( 1.8.5 Walking COS): Walking COS feature number + extension number + extension personal identification number (PIN)
•Verified Code Entry ( 1.8.6 Verified Code Entry): Verified Code Entry feature number +
+ verified code + verified code PIN
After changing mode, the mode remains in force for the duration of the call.
Available PBX Features with Security Mode Override:
After Security Mode Override is done with the Walking COS feature, the following features are available (It regards a remote operation from the assigned extension [ 1.26.5 Remote Extension Control by User]):
•FWD
•DND
• 1.2.2.6
•Absent Message ( 1.18.2 Absent Message)
•Extension Lock ( 1.8.3 Extension Lock)
•Time Service Switching Mode ( 2.2.4 Time Service)
DISA Intercept Routing—Busy/DND
If the destination called by the outside party is busy or in DND mode, and if (1) the busy destination does not set Call Waiting, FWD, or Idle Extension Hunting or (2) the destination is in DND mode and Idle Extension Hunting is not available, one of the following can be selected through system programming:
a)Busy Tone: Busy tone is sent to the caller.