1.15 Broadcasting Features
Button | Function |
|
|
DSS | Establishes a conversation with the corresponding member |
| extension, or remove the extension from the conversation. |
|
|
CONF (Conference) | Establishes a conversation with the current members in the order |
| assigned in the broadcasting group. Pressing this button again |
| will add the next available member in the group to the |
| conversation. |
|
|
TRANSFER | Removes the member who joined the conversation last. The |
| member can still listen to the announcement. |
|
|
FLASH/RECALL | Removes the member who joined the conversation last. The |
(Flash/Recall mode) | member will be disconnected from the broadcasting call and hear |
| a reorder tone. |
|
|
| Enables a |
|
|
A member extension can inform to the caller that he wants to speak or join the conversation by sending a notification. The caller will hear a notification tone and the requesting extension’s information will be shown on the display for five seconds.
Conditions
•Hardware Requirement: The MEC card
•COS programming determines the extensions (PTs only) that can use this feature.
•Ring Duration
A system timer is available to limit the call ring duration at the members. When this limit is reached, members' telephones will stop ringing. If no members have answered the call, the caller will hear a busy tone.
•The broadcasting call will reach a member extension regardless of settings such as Call Forwarding (except DND).
•If a member extension is busy and has Call Waiting for trunk calls activated when a broadcasting call is made, a call waiting tone will be sent to the extension.
•The call information of the caller (not members) will be recorded on the SMDR.
•A caller cannot make a broadcasting call with a call on hold.
•Call Pickup is not available for a broadcasting call. ( 
1.4.1.3 Call Pickup)
•The broadcasting call will not reach members when:
–the member extension has set DND for intercom calls.
–the member extension is a PS in Wireless XDP Parallel Mode. (
1.24.5 Wireless XDP Parallel Mode)
Installation Manual References
Installation Manual
2.3.2 MEC Card
<KX-TDA15/KX-TDA30>
6.5.6 MEC Card
