Peerless Industries KX-TDA30, KX-TDA100, KX-TDA15, KX-TDA200 manual Wireless XDP Parallel Mode

1.24 Portable Station (PS) Features

1.24.5 Wireless XDP Parallel Mode

Description

A PS can be used in parallel with a wired telephone (PT/SLT). In this case, the wired telephone is the main telephone and the PS is the sub telephone. When Wireless XDP Parallel Mode is enabled, the two telephones share one extension number (main telephone’s extension number) like XDP Parallel mode for a DPT and an SLT.

PBX

Super

Hybrid

Port

XDP Parallel Mode

Cell Station

Wireless XDP

Parallel Mode

DPT	Wireless Phone	PT/SLT	PS
	Extn. 102		Extn. 103

Conditions

•If one of the telephones goes off-hook while the other telephone is on a call, the call is switched to the telephone going off-hook. However, the call is not switched in one of the following conditions:

a)During a Conference call ( 1.13.1 Conference Features).

b)While Live Call Screening (LCS) or Two-way Record is activated (1.23.3 Voice Mail DPT (Digital) Integration).

c)While receiving OHCA ( 1.7.4.3 Off-hook Call Announcement (OHCA)).

d)While being monitored by another extension ( 1.7.3 Call Monitor).

e)During Consultation Hold.

f)During a broadcasting call ( 1.15.1 Broadcasting (KX-TDA30/KX-TDA100/KX- TDA200 only)).

(Consultation Hold: Allows an extension user to place a call on hold temporarily to perform Call Transfer, Conference, or Call Splitting.)

•Wireless XDP Parallel Mode can only be set from a PS. The wired telephone can accept

or deny this feature through COS programming (Wireless XDP Parallel Mode for Paired Telephone [515]). Once this feature is set, the setting at the wired telephone cannot be changed unless a PS changes the setting.

Feature Guide 227