Peerless Industries KX-TDA15, KX-TDA100, KX-TDA200, KX-TDA30 manual Ogm

1.16 Optional Device Features

Continued from the previous page

NoNoneS curity		Trunk Security		All Security
B	Is the dialled number			No
an extension number or
floating extension number?
	Yes
			Is the Walking COS/Verified		Yes
		C	Code Entry feature number dialled
Goes to
			for Security Mode Override?

		What is the dialled number?				No		Is the correct
							personal identification number
								(PIN) entered?
						Extension No./
	Others		Trunk Access No.		Feature No.*			No	D
						Floating
			+ Telephone No.		(e.g., FWD)
						Extension No.
Goes to D				The feature is set.		C		Reorder tone

The dialled number is sent to the trunk.

Yes

Goes to B

			Is the extension idle?
					Yes
		E
				The extension
				receives the call.
	No		Does the caller press
		while hearing a ringback
				tone (Call Retry)?
					Yes
Does the					Goes to A
destination
answer					No (DISA Intercept Time
the call?
						Time-out)
Yes					The call is routed to the
					intercept destination.
The call is established.					(DISA Intercept Routing
					No Answer)

					Does the caller press				No
					while hearing reorder
	No				tone (Call Retry)?
					Yes		(DISA Reorder Tone
Is the extension								Duration Time
						A		Time-out)
busy (Call Waiting					Goes to
mode on) and is		No
not in DND mode?
						The call is disconnected.
Yes
		What method is assigned
The call waits		for DISA Intercept
to be received.		Routing Busy/DND?
The extension
		Intercept Routing				Busy Tone			Outgoing
becomes idle.									Message
		No			Does the caller press				(OGM)
Goes to E
					while hearing busy
			(Busy Tone		tone (Call Retry)?
			Time Time-out)
		The call is disconnected.				Yes		The message for
								the busy/DND mode
					Goes to	A		is sent to the caller.
	The call is routed to
	the intercept destination.
	(Intercept Routing			Busy/DND)				Goes to	F

Does the destination
answer the call?		No
	(DISA Disconnect
Yes	Time after Intercept
	Time-out)

Goes to E

The call is established. The call is disconnected.

*: Feature numbers are available only when the Walking COS feature is used for Security Mode Override.

Feature Guide 157