Peerless Industries KX-TDA200, KX-TDA100 Feature Description, Automatic Outgoing ANI Number, Ani

1.21 E1 Line Service Features (KX-TDA100/KX-TDA200 only)

[Explanation]

Number in	Feature	Description
the table

(1)TIE Line Service Refer to the TIE Line Service feature. ( 1.28.1 TIE Line Service)

(2)Direct Inward Refer to the DID feature. ( 1.1.1.3 Direct Inward Dialling

Dialling (DID) (DID)/Direct Dialling In (DDI))

(3)Direct In Line Refer to the DIL feature. ( 1.1.1.2 Direct In Line (DIL))

(DIL)

(4)	Automatic	Outgoing ANI:
	Number	Sends the caller’s number to the E1 line. The sending
	Identification	method is the same as ISDN CLIP service. ( 1.20.1.2
	(ANI)	Calling/Connected Line Identification Presentation (CLIP/
		COLP))
		Incoming ANI:
		Receives the caller’s number from the E1 line.
		When the ANI number is received, it can be treated the
		same as a Caller ID number. ( 1.17.1 Caller ID)

(5)Call Charge The call charge meter pulses can be received during a

Information conversation. ( 1.25.2 Charge Meter)

Conditions

•If an E1 line is used as a trunk, the channel type depends on the contract with the telephone company.

•If "MFC-R2" is selected as the Dial Mode, the PBX always sends a dial tone, instead of the telephone company, when making a trunk call using E1 line.

202 Feature Guide