Peerless Industries KX-TDA200, KX-TDA100, KX-TDA15 manual Confirmation Tone, Type Description Tone

1.27 Audible Tone Features

1.27.2 Confirmation Tone

Description

At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone to extension users.

Type		Description
Tone 1	a) Sent when the setting is accepted.
	b) Sent when a call is received in voice-calling mode (Alternate
	Receiving—Ring/Voice). The caller’s voice will be heard after
	the tone.
Tone 2	a) Sent from an external paging device or an extension before
	being paged.
	b) Sent when a call is received in Hands-free Answerback
	mode.
Tone 3-1	a) Sent before a conversation is established when using the
	Paging feature.
	b) Sent when a conversation is established with the extension in
	the following modes after the call making operation:
		• Hands-free Answerback mode
		• Voice-calling mode (Alternate Receiving—Ring/Voice)
Tone 3-2	Sent just before a conversation is established when accessing
	the following features by the feature numbers:
	•	Call Park Retrieve
	•	Call Pickup
	•	Hold Retrieve
	•	Paging Answer
	•	TAFAS
Tone 4-1	Sent when moving from a two-party call to a three-party call.
	(e.g., Executive Busy Override, Conference, Privacy Release,
	Two-way Record.)
Tone 4-2	Sent when moving from a three-party call to a two-party call.
	(e.g., Executive Busy Override, Conference, Privacy Release,
	Two-way Record.)
Tone 5	Sent when a call is placed on hold (including Consultation Hold).

Conditions

•Confirmation Tone Patterns

All confirmation tone patterns have a default ( 4.2.1 Tones/Ring Tones).

•It is possible to eliminate each tone.

246 Feature Guide