1.26 Extension Controlling Features
1.26.2 Extension Feature Clear
Description
Extension users can clear all the following features set on their own telephone at once:
Features | After Setting |
|
|
Absent Message | Off |
|
|
BGM | Off |
|
|
FWD*/DND* | Off |
|
|
Call Pickup Deny | Allow |
|
|
Call Waiting* | Disable (In Canada, the default setting is |
| "Enable" [Call Waiting tone].) |
|
|
Data Line Security | Off |
|
|
Executive Busy Override Deny | Allow |
|
|
| |
|
|
Message Waiting | All messages left by other extensions |
| will be cleared. |
|
|
Paging Deny | Allow |
|
|
Parallelled Telephone | Paired SLT will ring. |
|
|
Hot Line* | Off |
|
|
Timed Reminder | Cleared |
|
|
Note: The features with "*" can be programmed not to be cancelled by this feature.
This feature is also known as Station Programme Clear.
Conditions
•Extension Lock ( 
1.8.3 Extension Lock) and the extension personal identification number (PIN) ( 
1.26.1 Extension Personal Identification Number (PIN)) will not be cleared by this feature.
•For Users in Canada only
If dial tone 2 is heard after Extension Feature Clear:
After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: Call Waiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard when going 
1.27.1 Dial Tone)
User Manual References
User Manual
1.7.13 Clearing Features Set at Your Extension (Extension Feature Clear)
