Peerless Industries KX-TDA100, KX-TDA15, KX-TDA200, KX-TDA30 manual Trunk Access

1.5 Making Call Features

1.5.5.3Trunk Access

Description

There are the following features to access a trunk.

Feature	Description	Accessing method
Idle Line	Selects an idle trunk	Dial the Idle Line Access number. Or
Access (Local	automatically from the assigned	press a L-CO button.
Access)	trunk groups.
Trunk Group	Selects an idle trunk from the	Dial the Trunk Group Access number
Access	corresponding trunk group.	and a trunk group number. Or press a
		G-CO button.
S-CO Line	Selects the desired trunk directly.	Dial the S-CO Line Access number and
Access		the trunk number. Or press the S-CO
		button.

Conditions

•COS programming determines the trunk groups available for making calls ( Trunk Group Number [500]).

•Trunk numbers can be referred on a trunk port basis ( LCOT/BRI Trunk Number Reference [409]).

•Button Assignment

A flexible button can be customised as a G-CO, L-CO, or S-CO button as follows:

Type	Assignable parameter
Loop-CO (L-CO)	No parameter (All assigned trunk groups
	through system programming are applied.)
Group-CO (G-CO)	A trunk group is assigned.
Single-CO (S-CO)	A specified trunk is assigned.

It is possible to assign trunks in the following ways:

–The same trunk to the S-CO button and to a G-CO button

–The same trunk group to more than one G-CO button

–More than one L-CO button

Dialling the Trunk Access number selects a CO button according to the priority: S-CO G-CO L-CO

•Direct Trunk Access

By pressing an idle CO button, it automatically switches on the hands-free operation mode and allows a user to use On-hook Dialling. The user need not press the SP-PHONE button, MONITOR button, or lift the handset.

•Group Hunting Order for Idle Line Access

An idle trunk is selected from the trunk groups assigned for Idle Line Access. If multiple trunk groups are available, the trunk group hunting sequence can be determined through system programming.

84

Feature Guide