3.2 PC Programming
6.When country/area data do not match:
a.Click [OK] to replace the country/area data of the PBX. Replacement may take several minutes to complete.
b.Follow the procedure described in Section 2.13.1 Starting the Hybrid IP- PBX (for
c.Repeat steps 2 to 4 to restart the Maintenance Console.
7.Follow the instructions of the wizard and assign the basic items (Quick Setup).
The programme menu appears.
Notice
1.During a long programming session, it is highly recommended that you periodically save the system data to the SD Memory Card. You can think of system data as stored in RAM, whereas SD Memory Card as stored on a hard disk. If the PBX undergoes a sudden power failure or system reset for some reason, all the system data in RAM will be lost.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup" icon before resetting the PBX or turning off the power, or (2) exit the Maintenance Console so that the PBX starts automatically saving the system data.
2.When the PBX is initialised, not all data is taken from the SD Memory Card. The data for present status of extension FWD/DND buttons is taken from battery backup memory in the PBX.
