1.25 Administrative Information Output Features
Item | Description |
|
|
Secret dialling | Controls secret dialling. If enabled, the dialled number will be |
| shown as dots. |
| This setting is effective only when the modified number is |
| selected in ARS dial setting above. If the |
| is selected in ARS dial setting, the dialled number will be |
| shown as dots regardless of this setting. |
|
|
Privacy dial | Enables or disables privacy dial. If enabled, the last four digits |
| of the dialled telephone number and any additional digits after |
| connection will be shown as "X". (e.g., |
|
|
Date order | The date order is changeable: month/day/year, day/month/ |
| year, year/month/day, year/day/month. |
|
|
Received call | Controls whether the time of receiving an incoming trunk call |
| is shown. |
|
|
Answered call | Controls whether the time of answering an incoming trunk call |
| is shown. |
|
|
Conditions
•SMDR Format
The following SMDR format can be set through system programming in order to match the paper size being used in the printer:
a)Page Length: determines the number of lines per page ( 
SMDR Page Length [802]).
b)Skip Perforation: determines the number of lines to be skipped at the end of every page ( 
SMDR Skip Perforation [803]).
The page length should be at least four lines longer than the skip perforation length.
Explanation:
Skip 
Perforation 
Page
Length
Machine Perforation
•The SMDR data is not deleted even if the PBX is reset.
•If the PBX is reset during a conversation, the call will not be recorded on the SMDR.
•The following calls are regarded as two separated calls in the SMDR:
–Calls before and after the flash/recall/EFA signal is manually sent during a conversation
–
