Peerless Industries KX-TDA200, KX-TDA100 Last Number Redial, Automatic Redial, Interrupt Redial

1.6 Memory Dialling Features

1.6.1.4Last Number Redial

Description

Every extension automatically saves the last external telephone number dialled to allow the same number to be dialled again.

Automatic Redial:

If Last Number Redial is performed in hands-free mode and the called party is busy, redialling will be automatically retried a preprogrammed number of times ( Automatic Redial Repeat Times [205]) at preprogrammed intervals ( Automatic Redial Interval [206]). The Redial Call No-answer Ring Duration time is programmable.

This feature is available only on certain PT models which have the SP-PHONE button.

Outgoing Call Log:

The last five dialled numbers are automatically stored at each extension. A display PT user can redial easily any of the stored numbers.

Conditions

•The memorised telephone number is replaced by a new one.

•If any dialling operation is done or an incoming call is answered during Automatic Redial, Automatic Redial is cancelled.

•Automatic Redial is not available for some countries/areas when using an analogue trunk.

•Interrupt Redial

When the called party or the seized trunk is busy, it is possible to press the REDIAL button continuously until the called party or the trunk becomes idle. There is no need to go off- hook, before pressing the REDIAL button.

•Outgoing Call Log Display by REDIAL Button

Pressing the REDIAL button on a display DPT while on-hook can display the Outgoing Call Log. System programming is required for this operation.

User Manual References

User Manual

1.2.3 Redial

1.11.1 Using the Call Log

90

Feature Guide