1.24 Portable Station (PS) Features

1.24 Portable Station (PS) Features

1.24.1 Portable Station (PS) Connection

Description

This PBX supports the connection of a PS (e.g., KX-TD7590, KX-TD7690). It is possible to use the PBX features using the PS like a PT.

Conditions

The PS registration is required through the system programming ( PS Registration [690]). To avoid unexpected registration to another PBX, the Personal Identification Number (PIN) for the PBX is necessary to register a PS ( Personal Identification Number (PIN) for PS Registration [692]). The registration can be cancelled ( PS Termination [691]).

Handover

Even if a PS user moves during a conversation, the PS will automatically switch between cells without disconnecting the call (Handover).

Handover is available in any of the following cases:

a)During a conversation with an extension or outside party.

b)While a call is ringing at the PS.

c)While the PS is in idle status.

PBX

CS

Interface

CS

Handover:

Calls will not be disconnected.

CS

On the contrary, Handover is not available in one of the following cases:

a)When the new (Handover) CS is busy.

b)When there is no CS within range.

c)

While the Live Call Screening (LCS) or Two-way Record is activated ( 1.23.3 Voice

 

Mail DPT (Digital) Integration).

d)

While the PS user is paging other extensions ( 1.14.1 Paging).

e)

During a doorphone call ( 1.16.1 Doorphone Call).

f)While the PS user is dialling digits to make a trunk call.

g)During a conversation with an extension using PC Console or PC Phone, to which the conversation is being recorded.

When a caller has dialled the extension number of a PS but the CS is busy, the caller hears a busy tone.

220 Feature Guide

Page 220
Image 220
Peerless Industries KX-TDA100, KX-TDA15, KX-TDA200 Portable Station PS Features, Portable Station PS Connection, Handover