3.1 Introduction

3.1Introduction

3.1.1Introduction

These Programming Instructions are designed to serve as an overall system programming reference for the Panasonic Hybrid IP-PBX. The PBX has a default setting. You can change the default to meet your requirements. System programming controls the PBX features described in this Feature Guide. It allows the PBX to be customised to the requirements. Only one person can programme at a time. Another person trying to enter programming mode will be rejected.

Ways to Programme

There are two programming methods:

PC (Personal Computer) Programming

All system programming can be performed. PC programming is described in Section 3.2 PC Programming.

PT (Proprietary Telephone) Programming

A subset of system programming can be performed. PT programming is described in Section 3.3 PT Programming. The extension user can programme by entering 3 digits programming numbers from the PT.

Password Security

A password is required to perform programming for security purposes. Do not disclose the password. This will avoid unauthorised access and possible dial through fraud.

Warning to the Administrator regarding the system password

1.Please inform the customer of the importance of the password and the possible dangers.

2.Please maintain the secrecy of the password. This will avoid unauthorised access and possible dial through fraud.

3.Please change the password periodically.

4.We strongly recommend that a password of 10 digits is used for maximum protection against hackers.

5.If the system password is forgotten, you can examine the backup of the system programming. Therefore, please keep your backup secure to avoid unauthorised access.

If you have a backup of the system data, you can find the password by loading the backup system data onto the PC and check the password using the programming tool. For how to back up the system data, refer to Section 3.3.4 Hybrid IP-PBX Maintenance (for KX-TDA100/KX-TDA200) or 7.3.4 Hybrid IP- PBX Maintenance (for KX-TDA15/KX-TDA30) in the Installation Manual.

If you do not have a backup system data, you have to set the PBX to the factory default and reprogramme it. Therefore, we recommend that you back up the system data.

318 Feature Guide

Page 318
Image 318
Peerless Industries KX-TDA200, KX-TDA100, KX-TDA15, KX-TDA30 manual Introduction, Ways to Programme, Password Security