
1.1 Incoming Call Features
*: This is applied only when a trunk call arrives on a DISA line but the line is busy at that time. Once the call reaches the destination extension by using the DISA feature, the Intercept Routing feature of the extension works.
Each of them can have different intercept destinations for each time mode (day/lunch/break/ night) ( 2.2.4 Time Service).
[Available Intercept Destination]
Intercept Destination | Availability |
Wired Extension (PT/SLT/ISDN
PS
Incoming Call Distribution Group
PS Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. +
Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
Conditions
•Intercept Routing—Busy/DND on/off
Each Intercept
If disabled, one of the following is activated depending on the trunk card type which a call arrives through:
a)LCOT or T1 (LCOT/GCOT) Card: The incoming trunk call will ring at the original destination while the caller hears a ringback tone.
b)Other Trunk Cards: A busy tone will be sent to the caller.
•If the intercept destination cannot receive the call:
a)Intercept
b)Intercept
•Idle Extension Hunting
If an extension is a member of an idle extension hunting group, calls to that extension will not be redirected by Intercept
30