1.17 Caller ID Features
2. Service Features
Features | Description | Details in |
|
|
|
Calling Line | Directs a DIL/DID/DDI/MSN call to a CLI | • 1.1.1.5 Calling |
Identification (CLI) | destination if the caller’s identification (Caller | Line |
Distribution | ID/CLIP/ANI) has been assigned to the Caller | Identification |
| ID Table. | (CLI) |
|
| Distribution |
|
|
|
Incoming Call Log | Caller’s information is automatically recorded | • 1.17.2 |
| in the call log of the called extension. This | Incoming Call |
| information is used for confirming the caller, | Log |
| calling the caller back, and/or storing the |
|
| number and name in the Personal Speed |
|
| Dialling. |
|
|
|
|
3.Number/Name Assignment
3.1 Automatic Caller ID Number Modification
This PBX automatically modifies the incoming caller’s number according to preprogrammed tables. The modified number will be recorded for calling back.
The PBX supports a number of modification tables, and each trunk group can select a table for use. Each table has ten locations for local/international calls and one for long distance calls.
The PBX checks the local/international call data first. If a match is not found, the long distance call data is applied.
[Example]
<Table Selection>
Trunk | Modification |
Group No. | Table |
1 | 1 |
2 | 3 |
: | : |
<Modification Table>
Modification Table 1
| Area Code | Removed No. of Digits Added No. | ||
Local/International | 012 | 3 | Blank | |
Call Data 1 | ||||
|
|
| ||
Local/International | 00 | 2 | 001 | |
Call Data 2 | ||||
|
|
| ||
: | : | : | : | |
Local/International |
|
|
| |
Call Data 10 |
|
|
| |
Long Distance Call | Not | 0 | 0 | |
Data 1 | programmable | |||
|
| |||
Note
When caller’s information is sent through an ISDN line and the call type is Subscriber, National, or International, the following modification table is used instead of the above table:
<Modification Table>
Removed No. of Digits Added No.
Subscriber Call Data | 0 | Blank |
National Call Data | 0 | 0 |
International Call Data | 0 | 00 |
