
Registers | www.ti.com |
4.52 Interrupt Enable Register for INTRUSB (INTRUSBE)
The Interrupt Enable Register for INTRUSB (INTRUSBE) is shown in Figure 67 and described in Table 68.
Note: Unless the UINT bit of CTRLR is set, do not read or write this register directly. Use the INTMSKSETR/INTMSKCLRR registers instead.
Figure 67. Interrupt Enable Register for INTRUSB (INTRUSBE)
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
VBUSERR | SESSREQ | DISCON | CONN | SOF | RESET_BABBLE | RESUME | SUSPEND |
LEGEND: R/W = Read/Write;
Table 68. Interrupt Enable Register for INTRUSB (INTRUSBE) Field Descriptions
Bit | Field | Value | Description |
7 | VBUSERR | Vbus error interrupt enable | |
6 | SESSREQ | Session request interrupt enable | |
5 | DISCON | Disconnect interrupt enable | |
4 | CONN | Connect interrupt enable | |
3 | SOF | Start of frame interrupt enable | |
2 | RESET_BABBLE | Reset interrupt enable | |
1 | RESUME | Resume interrupt enable | |
0 | SUSPEND | Suspend interrupt enable |
116 | Universal Serial Bus (USB) Controller |