ZyXEL Communications vantage access 8.1 The Import Device Screen, 8.1.2 Importing One Device, 8.1.1 Import Device Overview

8

Device Manipulation

This chapter describes the Provision Manager > Device Manipulation screens. These screens allow you to import and rename the devices managed by Vantage Access.

8.1 The Import Device Screen

This section describes the Import Device screen you use to register one or more devices.

8.1.1 Import Device Overview

You must register one or multiple devices to Vantage Access to allow remote management. The following outlines the general procedure.

1To register one device, configure the device information in the Import Device screen. To register more than one device, edit an XML or CSV file containing the device information and upload to Vantage Access in the Import Device screen.

2Configure the settings on a device to allow remote management from Vantage Access.

8.1.1.1Device XML or CSV File

You can import one or multiple devices to Vantage Access at a time.

To import multiple devices at a time, you need to create an XML or CSV file that contains basic device information (such as the device name, OUI, serial number and device type) of the compatible devices. See Figure 30 on page 94 for an XML file example.

8.1.2 Importing One Device

Follow the steps below to register a device to Vantage Access.

1Log into Vantage Access and click the Provision Manager icon.

2In the navigation panel, click Device Manipulation > Import Devices.

	113
Vantage Access User’s Guide