Chapter 22 Voice Service
22.9.3 Voice Profile RTP Redundancy Setup
Use the Redundancy screen to configure RTP payload redundancy.
1Select a registered device in the Device List window and click Data Model > Device > Services > VoiceService.
2Click a number and VoiceProfile.
3Click a number and RTP.
4Click Redundancy to display the configuration screen.
Figure 323
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 180
PARAMETER NAME | VALUE |
Enable | This field displays whether RTP payload redundancy is enabled or disabled. |
|
|
PayloadType | This field displays the RTP payload type. |
|
|
BlockPayloadType | This field displays the block payload type of the RTP redundancy packet. |
|
|
FaxAndModemRedun | This field displays the redundancy number for fax data passthrough. |
dancy |
|
|
|
ModemRedundancy | This field displays the redundancy number for modem data passthrough. |
|
|
DTMFRedundancy | This field displays the redundancy number for DTMF transmission. |
|
|
VoiceRedundancy | This field displays the redundancy number for voice transmission. |
|
|
MaxSessionsUsingRe | This field displays the maximum number of sessions with RTP redundancy for |
dundancy | this voice profile. |
|
|
22.10 Voice Profile Numbering Plan
Use the NumberingPlan screen to configure the numbering plan for this voice profile.
1Select a registered device in the Device List window and click Data Model > Device > Services > VoiceService.
2Click a number and VoiceProfile.
3Click a number and NumberingPlan to display the configuration screen.
374 |
| |
Vantage Access User’s Guide |
| |
|
|
|