Chapter 23 STB Service

23.3.4 DVBT Installation Settings

You can view and configure DVBT (Digital Video Broadcasting – Terrestrial) installation settings for a device in the Install screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Components.

3Click FrontEnd.

4Click DVBT > Install to display the screen.

Figure 393 TR-135: STBService: Components: DVBT Installation

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 227 TR-135: STBService: Components: DVBT Installation

PARAMETER NAME

VALUE

Start

This displays whether the device is scanning for services.

 

 

Status

This displays the status of the scanning process.

 

 

Progress

This displays the progress in percent of the scanning process.

 

 

StartFrequency

This displays the frequency (in kHz) at which to start the scanning process.

 

 

StopFrequency

This displays the frequency (in kHz) at which to stop the scanning process.

 

 

23.3.5 DVBT Service List Database Settings

You can view and configure DVBT service list database settings for a device in the ServiceListDatabase screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Components.

3Click FrontEnd.

4Click DVBT > ServiceListDatabase to display the screen.

422

 

Vantage Access User’s Guide