Chapter 17 LAN Device

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 87 TR-098: LAN Device: LANHostConfigManagement

PARAMETER NAME

VALUE

DHCPServerConfigurable

This field displays 1 if Vantage Access can change the default DHCP

 

server setting on the LAN interface.

 

This field displays 0 to have the device use the default DHCP server

 

settings on the LAN. No changes are allowed.

 

 

DHCPServerEnable

This field displays 1 to indicate that the DHCP server setting on the LAN

 

interface in enabled.

 

This field displays 0 to indicate that the DHCP server setting on the LAN

 

interface is disabled.

 

 

DHCPRelay

This field displays 1 when the device is set to act as a DHCP relay on the

 

LAN. The device will forward DHCP requests from the clients to the actual

 

DHCP server on the LAN. In this case, you must set up a DHCP server.

 

This field displays 0 when DHCP relay is deactivated. In this case, the

 

device acts as a DHCP server.

 

 

MinAddress

This field displays the first IP address in the DHCP IP pool the DHCP

 

server assigns to a DHCP client on the LAN.

 

 

MaxAddress

This field displays the last IP address in the DHCP IP pool the DHCP

 

server assigns to a DHCP client on the LAN.

 

 

ReservedAddresses

This field displays the IP address(es) in the DHCP IP pool that is reserved

 

and not assigned to a DHCP client on the LAN.

 

IP addresses are separated by a comma (,).

 

 

SubnetMask

This field displays the subnet mask for the DHCP clients.

 

 

DNSServers

This field displays the IP address of the DNS server whose information

 

the device sends to the DHCP clients.

 

DNS server IP addresses are separated by a comma (,).

 

 

DomainName

This field displays the domain name the device is to assign to DHCP

 

clients.

 

 

IPRouters

This field displays the IP address of the default gateway on the LAN.

 

IP addresses are separated by a comma (,).

 

 

DHCPLeaseTime

This field displays the lease time (in seconds) for the assigned IP address

 

to DHCP client(s).

 

This field displays -1to indicate that a lease time never times out.

 

 

UseAllocatedWAN

This field displays how the device is to assign DHCP client IP

 

address(es).

 

Normal means the device is set to assign IP address from the DHCP IP

 

pool configured.

 

UserAllocatedSubnet means the device is set to assign IP address from

 

the range of WAN IP addresses provided by your ISP.

 

Passthrough means the device is set to assign IP address to the DHCP

 

client whose MAC address is marked for passthrough.

 

 

AssociatedConnection

This field is applicable if the UseAllocatedWAN field displays

 

UseAllocatedSubnet or Passthrough.

 

This field displays the complete hierarchical name for the default WAN

 

interface to which this connection is associated.

 

 

PassthroughLease

This field displays the lease time (in seconds) to DHCP clients when the

 

WAN IP address is passthrough.

 

 

PassthroughMACAddress

This field is applicable if you select Passthrough in the

 

UseAllocatedWAN field.

 

 

 

231

Vantage Access User’s Guide