Chapter 19 General Device Setup

Table 124 TR-098 Amendment 1: Layer3 Forwarding: Forwarding (continued)

PARAMETER

VALUE

NAME

 

SourceSubnetMask

This field displays the source subnet mask in dotted decimal notation for the

 

route entry.

 

 

ForwardingPolicy

This field displays the index number of the forwarding policy the device is to

 

use.

 

 

GatewayIPAddress

This field displays the IP address of the gateway in dotted decimal notation for

 

the route entry.

 

 

Interface

This field displays the hierarchical name of the WAN interface associated to this

 

route entry. For example, “InternetGatewayDevice.WANDevice.1.-

 

WANConnectionDevice.1.WANPPPConnection.1”

 

 

ForwardingMetric

This field displays the number of hops to the destination. This is associated to

 

the cost of the route.

 

-1means this route is not used to forward traffic.

 

 

MTU

This field displays the maximum Ethernet packet size allowed on this route.

 

 

19.10 Layer2 Bridging

Use the Layer2Bridging screen to configure the bridge settings between layer2 LAN and/or WAN interfaces on the device.

Select a registered device in the Device List window and click Provision > Data Model > InternetGatewayDevice > Layer2Bridging.

Figure 228 TR-098 Amendment 1: Layer2Bridging

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 125 TR-098 Amendment 1: Layer2Bridging

LABEL

DESCRIPTION

MaxBridgeEntries

This field displays the maximum number of entries in the bridge table.

 

 

MaxFilterEntries

This field displays the maximum number of entries in the filter table.

 

 

MaxMarkingEntries

This field displays the maximum number of entries in the marking table.

 

 

BridgeNumberOfEnt

This field displays the number of entries in the bridge table.

ries

 

 

 

FilterNumberOfEntri

This field displays the number of entries in the filter table.

es

 

 

 

288

 

Vantage Access User’s Guide