Chapter 18 WAN Device
18.13.1 WAN IP Connection DetailsYou can configure and view basic IP settings for the WAN IP connection in the detailed WANIPConnection screen.
1Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > WANDevice.
2Click a number and WANConnectionDevice.
3Click a number and WANIPConnection.
4Click a number to display the screen as shown.
Figure 206
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 109
PARAMETER NAME | VALUE |
Enable | This field displays 1 to indicate that this link is active; otherwise this field |
| displays 0. |
ConnectionStatus | This field displays the link status (Unconfigured, Connecting, |
| Connected, PendingDisconnect, Disconnecting, Disconnected). |
|
|
PossibleConnectionType | This field displays the connection type(s) this link supports. |
s |
|
|
|
ConnectionType | This field displays the connection type for this link. |
|
|
Name | This field displays a descriptive name (up to 256 characters) for this link. |
|
|
| 263 |
Vantage Access User’s Guide | |
|
|