Chapter 15 WAN Device

15.10 WAN ATM F5 Loopback Diagnostics

Use the WANATMF5LoopbackDiagnostics screen to view loopback diagnostic (ping) test results and to configure timeout settings for the ping test on the ATM layer.

1Select a registered device in the Device List window and click InternetGatewayDevice > WANDevice.

2Click a number and WANConnectionDevice.

3Click a number and WANATMF5LoopbackDiagnostics to display the screen as shown.

Figure 118 TR-069: WAN Device: WANATMF5LoopbackDiagnostics

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 57 TR-069: WAN Device: WANATMF5LoopbackDiagnostics

PARAMETER NAME

VALUE

DiagnosticsState

This field displays the availability of the ping test result. Requested means

 

a test is to be initiated.

 

 

NumberOfRepetitions

This field displays the number of ping tests (between 1 and 4294967295) to

 

perform before displaying the test results.

 

 

Timeout

This field displays the timeout (between 1 and 4294967295 milliseconds)

 

for the ping test.

 

 

SuccessCount

This field displays the number of pings that received a successful response

 

within the timeout in the most recent ping test.

 

 

FailureCount

This field displays the number of pings that failed to receive a successful

 

response within the timeout in the most recent ping test.

 

 

AverageResponseTime

This field displays the average response time (in milliseconds) of all pings

 

that received a successful response in the most recent ping test.

 

If there is no successful response from the ping test, this field displays zero.

 

 

MinimumResponseTime

This field displays the minimum response time (in milliseconds) of the ping

 

that received a successful response in the most recent ping test.

 

If there is no successful response from the ping test, this field displays zero.

 

 

MaximumResponseTime

This field displays the maximum response time (in milliseconds) of the ping

 

that received a successful response in the most recent ping test.

 

If there is no successful response from the ping test, this field displays zero.

 

 

184

 

Vantage Access User’s Guide