Chapter 20 LAN Device

Table 144 TR-098 Amendment 1: LAN Device: WLANConfiguration (continued)

PARAMETER

VALUE

NAME

 

BasicDataTransmit

This field displays the wireless transmission rate (Mbps) for broadcast, multicast

Rates

and unicast frames on the device.

 

Multiple transmission rates are separated by commas (,). For example, “1,2”

 

means the device is able to send at 1 Mbps or 2 Mbps.

 

 

OperationalDataTr

This field displays the maximum transmission rate (in Mbps) allowed for unicast

ansmitRates

frames on the device.

 

Multiple transmission rates are separated by commas (,). For example, if the

 

BasicDataTransmitRates field is “1,2” and this field is “1,2,5.5,11”, then the

 

device can transmit unicast frames at the maximum rates of 5.5 Mbps or 11

 

Mbps.

 

 

PossibleDataTrans

This field displays the transmission rates for unicast frames WLAN clients are

mitRates

allowed when connected to the device.

 

For example, if this field displays “1,2,5.5”. This means that the device allows a

 

wireless connection of up to 5.5 Mbps even though it is capable of connecting at

 

11 Mbps.

 

 

InsecureOOBAcce

This field displays 1 to indicate that configuration changes are allowed to send

ssEnabled

through insecure management methods other than the WAN CPE Management

 

Protocol.

 

0 disables this feature.

 

 

BeaconAdvertisem

This field displays 1 to indicate that the device is set to send beacons to advertise

entEnabled

its presence; otherwise, this field is 0.

 

 

RadioEnabled

This field display 1 to indicate that the wireless transmission is allowed on the

 

device; otherwise, this field displays 0.

AutoRateFallBack

This field displays 1 to indicate that the device is set to automatically reduce

Enabled

wireless transmission rates due to noise or contention.

 

0 deactivates this feature.

 

 

LocationDescriptio

This field displays the location of the device for identification purposes.

n

 

 

 

RegulatoryDomain

This field displays the name of the regulatory body in your geographical area.

 

The first two characters are the country code as defined in ISO/IEC 3166-1. For

 

the third character, “ “ means all environment, “I” means inside and “O” means

 

outside.

 

 

TotalPSKFailures

This field is applicable for WPA and 802.11i authentication methods.

 

This field displays the number of times pre-shared key authentication has failed.

 

 

TotalIntegrityFailur

This field is applicable for WPA and 802.11i authentication methods.

es

This field displays the number of times MICHEAL integrity check has failed.

 

 

ChannelsInUse

This field displays the channel number(s) that is currently used on the device for

 

wireless transmission.

 

 

DeviceOperationM

This field displays the wireless operation mode for the device.

ode

 

 

 

DistanceFromRoot

This field displays the number of hops between this device and the wireless

 

bridge/repeater.

 

 

PeerBSSID

This field displays the MAC address of the peer wireless bridge/repeater.

 

 

AuthenticationServ

If user authentication is enabled, this field displays the location of the user

iceMode

database the device is to check.

 

 

TotalBytesSent

This field displays the number of transmitted bytes on this interface.

 

 

TotalBytesReceive

This field displays the number of received bytes on this interface.

d

 

 

 

320

 

Vantage Access User’s Guide