Chapter 9 Template Management

9.3.2 Modifying a Parameter Value

You can change the value of a parameter in a template in the Modify Parameter screen. In the template Edit screen, click the modify icon () for the selected parameter to display the Modify Parameter screen. The OUI-SNfield displays in the screen if you select a device- specific template.

Figure 48 Provision Manager > Template > Management > Edit > Modify Parameter

The following table describes the labels in this screen.

Table 16 Provision Manager > Template > Management > Edit > Modify Parameter

LABEL

DESCRIPTION

Template

This read-only field displays the name of the template to which this parameter belongs.

Name

 

 

 

Parameter

This field displays the descriptive name for a parameter.

Name

 

 

 

OUI-SN

This field is available in a device-specific template.

 

This field displays the OUI and the unique serial number of the device.

 

 

Type

This field displays the value type for the parameter.

 

 

Value

Specify the setting for the parameter.

 

 

Back

Click Back to return to the previous screen without saving the settings.

 

 

Apply

Click Apply to save the settings.

 

 

Reset

Click Reset to start configuring this screen again.

 

 

9.4 Template Creation

The following outlines the steps to creating a new template.

1Select a registered device from the Device List.

2Click Template > Save As Template.

3Select the parameters of the device you want to include in a template.

4Save the settings to a new template.

9.4.1Selecting Parameters and Creating a Template

After selecting a device for a template, you can then select the parameters and create the new template in this screen. Select a registered device in the Device List and click Template > Save as Template.

 

123

Vantage Access User’s Guide