Chapter 22 Voice Service

Table 176 TR-104: VoiceService: VoiceProfile: H.323 (continued)

PARAMETER NAME

VALUE

VLANIDMark

This field displays the IEEE 802.1Q VLAN ID the device adds to outgoing

 

H.323 signalling packets.

 

 

EthernetPriorityMark

This field displays the IEEE 802.p priority level the device adds to outgoing

 

H.323 signalling packets.

 

 

22.9 Voice Profile RTP Setup

Use the RTP screen to configure RTP (Real Time Protocol) settings for sending voice traffic on the device.

1Select a registered device in the Device List window and click Data Model > Device > Services > VoiceService.

2Click a number and VoiceProfile.

3Click a number and RTP to display the configuration screen.

Figure 320 TR-104: VoiceService: VoiceProfile: RTP

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 177 TR-104: VoiceService: VoiceProfile: RTP

PARAMETER NAME

VALUE

LocalPortMin

This field displays the start of the local port range for incoming voice traffic.

 

 

LocalPortMax

This field displays the end of the local port range for incoming voice traffic.

 

 

DSCPMark

This field displays the DiffServ code number for the outgoing voice traffic.

 

 

VLANIDMark

This field displays the VLAN ID to use for the outgoing voice traffic.

 

 

EnthernetPriorityMark

This field displays the IEEE 802.1D priority level to use for the outgoing voice

 

traffic.

 

 

TelephoneEventPaylo

This field displays the traffic type for the RTF telephone event.

adType

 

 

 

22.9.1 Voice Profile RTCP Setup

Use the RTCP screen to configure RTCP (Real-time Transport Control Protocol) settings for sending voice traffic on the device.

1Select a registered device in the Device List window and click Data Model > Device > Services > VoiceService.

372

 

Vantage Access User’s Guide