Chapter 21 WAN Device

 

Table 163 TR-098 Amendment 1: WAN Device: WANPPPConnection: Details (continued)

 

PARAMETER NAME

VALUE

 

RouteProtocolRx

This field displays the routing protocol (RIP1, RIP2 or OSPF) the link is to

 

 

use.

 

 

Off disables the routing feature.

 

 

 

 

PPPLCPEcho

This field displays the time (in seconds) for PPP Link Control Protocol

 

 

(LCP) echo.

 

 

 

 

PPPLCPEchoRetry

This field displays the time (in seconds) for PPP Link Control Protocol

 

 

(LCP) echo retry.

 

 

 

 

ShapingRate

This field displays the rate (in bits per second) the device shapes the

 

 

outgoing traffic to.

 

 

 

 

ShapingBurstSize

This field displays the burst size (in bytes) for traffic shaping.

 

 

 

 

PortMappingNumberOfE

This field displays the number of port mappings on this link.

 

ntries

 

 

 

 

21.14.2 Port Mapping Table

Use the PortMapping screen to view the port mapping instance for the WAN PPP connection. Refer to Section 11.2.4 on page 132 for other field descriptions.

1Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > WANDevice.

2Click a number and WANConnectionDevice.

3Click a number and WANPPPConnection.

4Click a number and PortMapping to display the screen as shown.

Figure 298 TR-098 Amendment 1: WAN Device: WANPPPConnection: PortMapping

21.14.3 Port Mapping Table Details

Use the detailed PortMapping screen to configure the port mapping settings for the WAN PPP connection.

1Select a registered device in the Device List window and click Data Model > InternetGatewayDevice > WANDevice.

2Click a number and WANConnectionDevice.

3Click a number and WANPPPConnection.

4Click a number and PortMapping.

5Click a number to display the screen as shown.

 

351

Vantage Access User’s Guide