36

Alert Setting

This chapter describes the Email Server and Email Alert screens you use to specify a mail server and the type of logs to send.

36.1 Specifying an Email Server

Use the Email Server screen to specify the e-mail account to which Vantage Access sends the logs and alerts.

Log into Vantage Access as root and click the Monitor Manager icon in the control panel. Then click Alert Setting > Email Server to display the configuration screen.

Figure 526 Monitor Manager: Alert Setting: Email Server

The following table describes the labels in this screen.

Table 325 Monitor Manager: Alert Setting: Email Server

LABEL

DESCRIPTION

Email Server

 

 

 

IP or Domain

Enter the server name or the IP address of the mail server for the e-mail addresses

Name

specified below. If this field is left blank, logs and alert messages will not be sent via

 

e-mail.

Email Sender

Enter the e-mail address that you want to be in the from/sender line of the log e-mail

 

message that the Vantage Access sends. If you activate SMTP authentication, the

 

e-mail address must be able to be authenticated by the mail server as well.

User Name

Enter the user name (up to 31 characters) (usually the user name of a mail

 

account).

Password

Enter the password associated with the user name above.

 

 

Apply

Click Apply to save the changes.

 

 

Reset

Click Reset to start configuring this screen again.

 

 

 

555

Vantage Access User’s Guide