Chapter 22 Voice Service

22.7 MGCP

Use the MGCP screen to view and configure settings for the MGCP call agent(s) for the profile.

1Select a registered device in the Device List window and click Data Model > Device > Services > VoiceService.

2Click a number and VoiceProfile.

3Click a number and MGCP.

Figure 318 TR-104: VoiceService: VoiceProfile: MGCP

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 175 TR-104: VoiceService: VoiceProfile: MGCP

PARAMETER NAME

VALUE

CallAgent1 .. 2

This field displays the host name or the IP address of the MSCP call agent.

 

 

CallAgentPort1 .. 2

This field displays the destination port to use to connect to the MSCP call

 

agent.

 

 

RetranIntervalTimer

This field displays the time interval (in milliseconds) the device is to wait

 

before sending the message again.

 

 

MaxRetranCount

This field displays the maximum number of times the device is to resend a

 

message.

 

 

RegisterMode

This field displays the registration mode.

 

 

LocalPort

This field displays the listening port number for incoming call control

 

signalling.

 

 

Domain

This field displays the name of the domain to which the device belongs.

 

 

User

This field displays the user name used to access the call agent.

 

 

DSCPMark

This field displays the DiffServ Code Point the device adds to outgoing

 

MGCP signalling packets.

 

 

VLANIDMark

This field displays the IEEE 802.1Q VLAN ID the device adds to outgoing

 

MGCP signalling packets.

 

 

370

 

Vantage Access User’s Guide