Chapter 26 General Device Setup

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 290 TR-106 Amendment 1: ManagementServer

PARAMETER

VALUE

NAME

 

URL

This field displays the address of the Vantage Access server to which the device

 

connects for remote management.

 

For example, “http://www.zyxel.com/TR106-a-1”.

 

 

UserName

This field displays the user name the device uses to access Vantage Access.

 

 

Password

This field displays the password (up to 256 alphanumeric characters) associated

 

with the user name above.

 

Note: You must configure the same access user name and

 

password on the device and the Vantage Access server.

 

 

PeriodicInformEn

This field displays true to indicate that the device is set to regularly send device

able

information updates to Vantage Access.

 

This field displays false to indicate that this feature is disabled. In this case, you

 

must then manually update device information changes.

 

 

PeriodicInformInte

This field is applicable when the PeriodicInformEnable field is 1.

rval

This field displays the time (in seconds) the device is to wait before sending device

 

request information updates to Vantage Access.

 

 

PeriodicInformTim

This field is applicable when in the PeriodicInformEnable field is 1.

e

This field displays the reference time and date the device is to initiate the

 

information updates. The time in the format yyyy-mm-ddThh:mm:ss.

 

 

ParameterKey

This field displays the parameter that is changed from the most recent information

 

update.

 

 

ConnectionReque

This field displays the URL of the device to which Vantage Access sends a

stURL

connection request.

 

 

ConnectionReque

This field displays the user name Vantage Access uses to access the device.

stUsername

This is required if you want Vantage Access to initiate a connection and access the

 

device.

 

 

ConnectionReque

This field displays the password associated with the user name above.

stPassword

 

 

 

UpgradesManage

This field displays 1 to allow Vantage Access to upgrade firmware on the device.

d

This field displays 0 to indicate that remote firmware upgrade through Vantage

 

Access is disabled.

 

 

KickURL

This field displays the URL on the LAN from which the device can initiate a Kick

 

request.

 

 

DownloadProgres

This field displays the URL of a web site on the LAN to which a user’s web

sURL

browser is redirected to display the file transfer progress of the device.

 

 

UDPConnectionR

This field displays the URL of the device to which Vantage Access sends a UDP

equestAddress

connection request.

 

 

UDPConnectionR

This field displays the maximum number of times the UDP connection request is

equestAddressNo

made.

tificationLimit

 

 

 

STUNEnable

This displays whether STUN (Simple Traversal of User Datagram Protocol through

 

Network Address Translators (NATs)) is enabled or not.

 

 

STUNServerAddr

This displays the STUN server’s IP address.

ess

 

 

 

STUNServerPort

This displays the port number of the STUN server.

492

 

Vantage Access User’s Guide