Chapter 21 WAN Device

Figure 290 TR-098 Amendment 1: WAN Device: WANPOTSLinkConfig

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 159 TR-098 Amendment 1: WAN Device: WANPOTSLinkConfig

PARAMETER NAME

VALUE

Enable

This field displays 1 to indicate that the POTS link is active; otherwise it

 

displays 0.

LinkStatus

This field displays the link status (Up, Down, Dialing, Connecting or

 

Unavailable).

 

 

ISPPhoneNumber

This field displays the phone number (up to 64 digits in countrycode-

 

areacode-phone number format) to dial to connect to the ISP. For example,

 

+86-10-62618501.

 

Multiple phone numbers are separated with a colon (:).

 

 

ISPInfo

This field displays a descriptive name (up to 64 characters) to identify this

 

ISP.

 

 

LinkType

The default link type is PPP_Dialup.

 

 

NumberOfRetries

This field displays the number of times (between 0 and 4294967295) the

 

CPE device is to re-dial for Internet connection.

 

 

DelayBetweenRetries

This field displays the time (in milliseconds) the CPE device is to wait

 

before attempting to connect to the ISP again.

 

 

Fclass

This field indicates the transmission functions the CPE device is capable of.

 

0:data

 

1, 2, 2.0: fax

 

8: voice

 

80: DSVD

 

 

DataModulationSupporte

This field displays the modulation method(s) supported for data transfer.

d

 

 

 

DataProtocol

This field displays the protocol(s) supported for data transfer.

 

 

DataCompression

This field displays the compression method used for data transfer.

 

 

PlusVTRCommandSupp

This field indicates whether full-duplex mode is activated on the link or not.

orted

 

 

 

342

 

Vantage Access User’s Guide