Chapter 23 STB Service

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 215 TR-135: STBService: Capabilities: MPEG4Part10 ProfileLevel Settings

PARAMETER NAME

VALUE

Profile

This displays the MPEG4 part 10 profile.

 

 

Level

This displays the MPEG4 part 10 level.

 

 

MaximumDecodingCa

This displays the maximum decoding capability for this video standard in

pability

kilobits per second.

 

 

23.2.15 SMPTEVC1 Setup

You can view and configure SMPTE (Society of Motion Picture and Television Engineers) VC-1settings in the SMPTEVC1 screen. This screen displays the set of supported SMPTE VC-1 profiles. It also displays the set of audio standards supported when SMPTE VC-1 is used.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Capabilities.

3Click Video Decoder > SMPTEVC1 to display the screen.

Figure 380 TR-135: STBService: Capabilities: SMPTE VC-1

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 216 TR-135: STBService: Capabilities: SMPTE VC-1

PARAMETER NAME

VALUE

AudioStandards

This displays the SMPTE VC-1 audio standards supported by the STB.

 

 

ProfileLevelNumberOf

This displays the number of profile levels.

Entries

 

 

 

23.2.16 SMPTE VC-1 Profile Levels

You can view and configure SMPTE VC-1 Profile Levels in the ProfileLevel screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Capabilities.

3Click Video Decoder > SMPTEVC1 > ProfileLevel to display the screen.

414

 

Vantage Access User’s Guide