ZyXEL Communications vantage access 19.13 IP Ping Diagnostics

Chapter 19 General Device Setup

Figure 248 TR-098 Amendment 1: LANConfigSecurity

Use the IPPingDiagnostics screen to configure the ping test settings on a device.

Select a registered device in the Device List window and click Provision > Data Model >

InternetGatewayDevice > IPPingDiagnostics.

Figure 249 TR-098 Amendment 1: IPPingDiagnostics

The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 136 TR-098 Amendment 1: IPPingDiagnostics

LABEL	DESCRIPTION
DiagnosticsState	This field displays the ping test result.

Interface	This field displays the hierarchical name of the interface for ping diagnostics.
	For example, “InternetGatewayDevice.WANDevice.1.-
	WANConnectionDevice.1.WANPPPConnection.1”
	You can enter up to 256 characters for the interface name.

Host	This field displays the IP address or domain name of the host the device is to
	ping to test the connection.

NumberOfRepetition	This field displays the number of ping test before displaying the result.
s

Timeout	This field displays the timeout (in milli-seconds) for a ping test.

DataBlockSize	This field displays the size of the packet to send for each ping test.

DSCP	This field displays the DiffServ Code Point (DSCP) to use for the test packets.
	The default is 0.

SuccessCount	This field displays the number of ping tests that are successful before the
	timeout.