Chapter 23 STB Service

4Click IP > RTPAVPF to display the screen.

Figure 403 TR-135: STBService: Components: IP: RTPAPVF

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 235 TR-135: STBService: Components: IP: RTPAPVF

PARAMETER NAME

VALUE

Enable

This displays whether RTP AVPF receiver report generation is enabled.

 

 

Status

This displays the status of RTP AVPF receiver report generation.

 

 

RetransmitTimeout

This displays the time (in milliseconds) the receiver waits for a retransmitted

 

packet before considering it lost.

 

 

MinLossPackets

This displays the minimum number of packets the receiver waits before

 

issuing a retransmission request.

 

 

MaxReportTime

This displays the maximum time in milliseconds the receiver waits between a

 

lost packet and the generation of a retransmission request.

 

 

MaxLossBurst

This displays the maximum number of consecutive lost packets for which the

 

receiver attempts recovery.

 

 

23.3.15 Front End IGMP Setup

You can view and configure front end IGMP settings in the IGMP screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Components.

3Click FrontEnd.

4Click IP > IGMP to display the screen.

428

 

Vantage Access User’s Guide