Chapter 18 WAN Device
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 105
PARAMETER NAME | VALUE |
WANIPConnectionNumberOf | This field displays the number of WANIPConnection entries |
Entries | associated to the WANConnectionDevice. |
|
|
WANPPPConnectionNumber | This field displays the number of WANPPPConnection entries |
OfEntries | associated to the WANConnectionDevice. |
|
|
Use the WANDSLLinkConfig screen to set the ATM layer properties for the physical DSL connection.
1Select a registered device in the Device List window and click Configuration > InternetGatewayDevice > WANDevice.
2Click a number and WANConnectionDevice.
3Cick a number and WANDSLLinkConfig to display the screen as shown.
Figure 201
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 106
PARAMETER NAME | VALUE |
Enable | This field displays 1 to indicate that the DSL link is active; otherwise, this |
| field displays 0. |
|
|
LinkStatus | This field displays the link status (Up, Down, Initializing or Unavailable). |
|
|
258 |
| |
Vantage Access User’s Guide |
| |
|
|
|