Chapter 18 WAN Device

Table 112 TR-098: WAN Device: WANPPPConnection: Details (continued)

PARAMETER NAME

VALUE

AutoDisconnectTime

This field displays the number of seconds (between 0 and 4294967295) the

 

device is to wait before disconnecting the link.

 

0 means you do not want the device to disconnect the link automatically.

 

 

IdleDisconnectTime

This field displays the number of seconds (between 0 and 4294967295) of

 

inactivity timeout for a link. When the time is reached without any network

 

activity through the link, the device automatically disconnects the link.

 

0 means you do not want the device to disconnect the link automatically.

 

 

WarnDisconnectDelay

This field displays the number of seconds (between 0 and 4294967295)

 

before the device changes the state of the link to the disconnecting state.

 

 

RSIPAvailable

This field displays whether the Realm-specific IP (RSIP) feature is

 

supported on the device.

 

 

NATEnabled

This field displays 1 to indicate that the NAT (Network Address Translation)

 

feature is enabled for this link; otherwise, this field displays 0.

 

 

Username

This field displays the Internet access account user name (up to 64

 

characters) provided by the ISP for authentication.

 

 

Password

This field displays the Internet access account password (up to 64

 

characters) provided by the ISP for authentication.

 

 

PPPEncryptionProtocol

This field displays the protocol used for PPP encryption between the device

 

and the ISP’s network.

 

 

PPPCompressionProtoc

This field displays the protocol used for PPP traffic compression between

ol

the device and the ISP’s network.

 

 

PPPAuthenticationProtoc

This field displays the protocol used for PPP connection authentication

ol

between the device and the ISP’s network.

 

 

ExternalIPAddress

This field displays the IP address used by NAT for this connection.

 

 

RemoteIPAddress

This field displays the remote IP address for this connection.

 

 

MaxMRUSize

This field displays the maximum size (between 1 and 1540) for the Ethernet

 

frames allowed on this link.

 

 

CurrentMRUSize

This field displays the current configured maximum frame size allowed from

 

a remote host.

 

 

DNSEnabled

This field displays 1 to set the device to resolve domain names through this

 

link; otherwise, this field is 0.

 

 

DNSOverrideAllowed

This field displays 1 to allow a non-empty DNS address to be replaced by a

 

DNS entry received on the WAN; otherwise, this field displays 0.

DNSServers

This field displays the IP address(es) of the DNS server(s).

 

Multiple IP addresses are separated by a comma.

 

 

MACAddress

This field is applicable when you select Enable in the

 

MACAdddressOverride field.

 

This field displays the MAC address of this interface on the device.

 

 

MACAddressOverride

This field displays 1 to allow change of MAC address on this interface in the

 

MACAddress field.

 

This field displays 0 if you do not allow MAC address modification.

 

 

TransportType

This field displays the transport protocol for the PPP connection.

 

 

PPPoEACName

This field displays the descriptive name for the PPPoE Access

 

Concentrator (AC).

 

 

PPPoEServiceName

This field displays the descriptive name for the PPPoE service.

 

 

ConnectionTrigger

This field displays how the device will establish a connection (AlwaysOn,

 

OnDemand and Manual) for Internet access.

 

 

 

269

Vantage Access User’s Guide