Chapter 23 STB Service

23.6.16 Main Stream Video Response Sample Statistics

You can view information about each Main Stream instance’s video decoder statistics during the sample interval in the VideoResponseStats screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and ServiceMonitoring.

3Click MainStream, then click a number to display the screen.

4Click Sample, then click VideoResponseStats.

Figure 457 TR-135: STBService: ServiceMonitoring: MainStream Sample VideoResponse

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 274 TR-135: STBService: ServiceMonitoring: MainStream Sample VideoResponse

PARAMETER NAME

VALUE

SampleSeconds

This displays the number of seconds during which Main Stream instance data

 

was collected for this AV stream, during the sample interval.

 

 

MinimumVideoSystem

This displays the minimum time period between the transmission of an IGMP

Response

JOIN command (or an RTSP SETUP command) and the display of the first I

 

frame, for this AV stream, during the sample interval.

 

 

MaximumVideoSyste

This displays the maximum time period between the transmission of an IGMP

mResponse

JOIN command (or an RTSP SETUP command) and the display of the first I

 

frame, for this AV stream, during the sample interval.

 

 

23.6.17 Main Stream High Level Metric Sample Statistics

You can view information about each Main Stream instance’s high level metric statistics during the sample interval in the HighLevelMetricStats screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and ServiceMonitoring.

3Click MainStream, then click a number to display the screen.

4Click Sample, then click HighLevelMetricStats.

466

 

Vantage Access User’s Guide