Chapter 16 General Device Setup
Table 69
PARAMETER | VALUE | |
NAME | ||
| ||
UpgradesManage | This field displays 1 to allow Vantage Access to upgrade firmware on the device. | |
d | This field displays 0 to indicate that remote firmware upgrade through Vantage | |
| Access is disabled. | |
|
| |
KickURL | This field displays the URL on the LAN from which the device can initiate a Kick | |
| request. | |
|
| |
DownloadProgres | This field displays the URL of a website on the LAN to which a user’s web browser | |
sURL | is redirected to display the file transfer progress of the device. | |
|
|
16.6 Time
Use the Time screen to configure time settings (such as the network time server and time zone) on the device.
Click Provision > Data Model > InternetGatewayDevice > Time.
Figure 137
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 70
PARAMETER | VALUE | |
NAME | ||
| ||
NTPServer1 .. 5 | This field displays the IP address or host name of the time server the device is to | |
| use to update the system time. For example, “http://www.zyxel.com”. | |
|
| |
CurrentLocalTime | This field displays the current system time on the device. | |
|
| |
LocalTimeZone | This field displays the time offset from the UTC (Universal Time Coordinate). For | |
| example, +08:00. | |
|
| |
LocalTimeZoneNa | This field displays the name of the local time zone. | |
me |
| |
|
| |
DaylightSavingsU | This field displays 1 to indicate that daylight savings time is enabled on the device. | |
sed | This field displays 0 if this feature is disabled. | |
|
|
204 |
| |
Vantage Access User’s Guide |
| |
|
|
|