Chapter 23 STB Service

4Click Sample, then click MPEG2TSStats.

Figure 454 TR-135: STBService: ServiceMonitoring: MainStream Sample MPEG2TSStats

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 271 TR-135: STBService: ServiceMonitoring: MainStream Sample MPEG2TSStats

PARAMETER NAME

VALUE

SampleSeconds

This displays the number of seconds during which MPEG2-TS data was

 

collected for this AV stream, during the sample interval.

 

 

TSPacketsReceived

This displays the number of MPEG2-TS packets received for this AV stream,

 

during the sample interval.

 

 

TSSyncByteErrorCou

This displays the number of MPEG2-TS packets with an invalid transport

nt

synchronization byte received for this AV stream, during the sample interval.

 

 

TSSyncLossCount

This displays the number of MPEG2-TS loss of synchronization events for this

 

AV stream, during the sample interval.

 

 

PacketDiscontinuityC

This displays the number of MPEG2-TS discontinuity errors that have been

ounter

captured for this AV stream, during the sample interval.

 

 

PacketDiscontinuityC

This displays the number of MPEG2-TS discontinuity errors that have been

ounterBeforeCA

captured for this AV stream, during the sample interval, before CA encryption

 

(if applied).

 

 

23.6.14 Main Stream Video Decoder Sample Statistics

You can view information about each Main Stream instance’s video decoder statistics during the sample interval in the VideoDecoderStats screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and ServiceMonitoring.

3Click MainStream, then click a number to display the screen.

4Click Sample, then click VideoDecoderStats.

 

463

Vantage Access User’s Guide