Chapter 23 STB Service

23.2.5 Video Decoder Setup

You can view and configure video decoder settings in the Video Decoder screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Capabilities.

3Click Video Decoder to display the screen.

Figure 370 TR-135: STBService: Capabilities: Video Decoder

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 209 TR-135: STBService: Capabilities: Video Decoder

PARAMETER NAME

VALUE

VideoStandards

This displays the video standards supported by the STB.

 

 

23.2.6 MPEG2 Part 2 Setup

You can view and configure MPEG2 Part 2 settings in the MPEG2Part2 screen. This screen displays supported MPEG2 profiles. It also displays the set of audio standards supported when MPEG2 Part 2 is used.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Capabilities.

3Click Video Decoder > MPEG2Part2 to display the screen.

Figure 371 TR-135: STBService: Capabilities: MPEG2Part2

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 210 TR-135: STBService: Capabilities: MPEG2Part2

PARAMETER NAME

VALUE

AudioStandards

This displays the MPEG2 Part 2 audio standards supported by the STB.

 

 

ProfileLevelNumberOf

This displays the number of profile levels.

Entries

 

 

 

 

409

Vantage Access User’s Guide