ZyXEL Communications vantage access 22.11 Voice Profile Tone Setup, 22.10.2 Voice Profile Prefix Information Setup

Chapter 22 Voice Service

Use the detailed PrefixInfo screen to view the list of prefix information entries for the voice profile.

1Select a registered device in the Device List window and click Data Model > Device > Services > VoiceService.

2Click a number and VoiceProfile.

3Click a number and NumberingPlan.

4Click PrefixInfo and a number to display the screen.

Figure 326 TR-104: VoiceService: VoiceProfile: PrefixInfo: Details

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 182 TR-104: VoiceService: VoiceProfile: PrefixInfo: Details

PARAMETER NAME	VALUE
PrefixRange	This field displays the range of prefixes

PrefixMinNumberOfDi	This field displays the minimum digits allowed for the prefix range. Once the
gits	inter-digit timer and the minimum input digit is reached, an out-going request
	is initiated.

PrefixMaxNumberOfD	This field displays the maximum digits allowed for the prefix range. Once the
igits	inter-digit timer and the maximum input digit is reached, an out-going request
	is initiated.

NumberOfDigitsToRe	This field displays the number of digits to remove from the position specified in
move	the internal digit buffer.

PosOfDigitsToRemov	This field displays the position of the digits in the internal buffer to remove.
e

DialTone	This field displays the name of the dial tone to display when a user dials the
	same prefix number as specified.

FacilityAction	This field displays the name of the facility action the device performs.

FacilityActionArgumen	This field displays the arguments used by the facility action above.
t

Use the Tone screen to view and configure the tones and announcements generated by the device.