Chapter 24 General Device Setup
Figure 466
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 280
PARAMETER | VALUE | |
NAME | ||
| ||
Manufacturer | This is the name of the company that produced this device. | |
|
| |
ManufacturerOUI | This field displays the | |
| the company. The OUI is a unique number assigned by the IANA. Devices | |
| produced by the same company have the same | |
|
| |
ModelName | This field displays the device model name. | |
|
| |
Description | This field displays additional information about the device. | |
|
| |
ProductClass | This field identifies the product or class over which the SerialNumber parameter | |
| is unique. | |
|
| |
SerialNumber | This field displays the device serial number. | |
|
| |
HardwareVersion | This field displays the hardware model name. | |
|
| |
SoftwareVersion | This field displays the firmware version number. | |
|
| |
EnabledOptions | This field displays the name of the options enabled on the device. | |
|
| |
AdditionalHardwa | This field displays the available information about the additional hardware version. | |
reVersion |
| |
|
| |
AdditionalSoftwar | This field displays the available information about the additional software version. | |
eVersion |
| |
|
| |
ProvisioningCode | The provisioning code is used by the service provider to identify specific | |
| parameter settings for the device. | |
| Enter the identifier of the DSL service provider or provisioning information. You | |
| can enter up to 64 characters (use only | |
|
| |
DeviceStatus | This field displays the current operational status of the device. The device’s status | |
| may be "Up", "Initializing", "Error", or "Disabled". | |
|
| |
UpTime | This field displays the time (in seconds) since the device was last restarted. | |
|
|
| 475 |
Vantage Access User’s Guide | |
|
|