ZyXEL Communications vantage access 9.3.1 Adding a New Parameter

Chapter 9 Template Management

Table 14	Provision Manager > Template > Management > Edit (continued)
LABEL		DESCRIPTION
First		This link is not available in the first screen.
		Click First to return to the first screen.

Prev		Click Prev to go to the previous screen.

Last		This link is not available in the last screen.
		Click Last to go to the last screen.

Go		Enter a page number and click Go to display the entries in that page.

Back		Click Back to return to the previous screen.

Add		Click Add to insert a new parameter.

Delete		Click Delete to remove the selected parameter.

9.3.1 Adding a New Parameter

Use the Add Parameter screen to insert a new parameter to a template. In the template Edit screen, click Add to display the Add Parameter screen.

Figure 47 Provision Manager > Template > Management > Edit > Add Parameter

The following table describes the labels in this screen.

Table 15 Provision Manager > Template > Management > Edit > Add Parameter

LABEL	DESCRIPTION
Template	This read-only field displays the name of the template to which this parameter belongs.
Name

Parameter	Enter a descriptive name for a parameter. You can enter up to 250 characters
Name	containing 0-9, a-z, A-Z, _ or - with no spaces.

OUI	This field is available in a device-specific template.
	Enter the OUI of the device. You can obtain the device OUI number in the Device List
	screen.

Serial	This field is available in a device-specific template.
Number	Enter the unique serial number of the device. You can obtain the device serial number
	in the Device List screen.

Type	Select the value type for the parameter.

Value	Specify the setting for the parameter.

Back	Click Back to return to the previous screen without saving the settings.

Apply	Click Apply to save the settings.

Reset	Click Reset to start configuring this screen again.