Chapter 23 STB Service

23.2.9 MPEG4 Part 2 Setup

You can view and configure MPEG4 Part 2 settings in the MPEG2Part2 screen. This screen displays the supported MPEG4 profiles. It also displays the set of audio standards supported when MPEG4 Part 2 is used.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Capabilities.

3Click Video Decoder > MPEG4Part2 to display the screen.

Figure 374 TR-135: STBService: Capabilities: MPEG4Part2

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 212 TR-135: STBService: Capabilities: MPEG4Part2

PARAMETER NAME

VALUE

AudioStandards

This displays the MPEG4 Part 2 audio standards supported by the STB.

 

 

ProfileLevelNumberOf

This displays the number of profile levels.

Entries

 

 

 

23.2.10 MPEG4 Part 2 Profile Levels

You can view and configure MPEG4 Part 2 Profile Levels in the ProfileLevel screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and Capabilities.

3Click Video Decoder > MPEG4Part2 > ProfileLevel to display the screen.

Figure 375 TR-135: STBService: Capabilities: MPEG4Part2 ProfileLevel

23.2.11 MPEG4 Part 2 Profile Level Settings

You can view and configure each MPEG4 Part 2 profile and level. Each is a combination of profile and level.

 

411

Vantage Access User’s Guide