Chapter 15 WAN Device

Table 62 TR-069: WAN Device: WANPPPConnection: Details (continued)

PARAMETER NAME

VALUE

RouteProtocolRx

This field displays the routing protocol (RIP1, RIP2 or OSPF) the link is to

 

use.

 

Off disables the routing feature.

 

 

PPPLCPEcho

This field displays the time (in seconds) for PPP Link Control Protocol

 

(LCP) echo.

 

 

PPPLCPEchoRetry

This field displays the time (in seconds) for PPP Link Control Protocol

 

(LCP) echo retry.

 

 

PortMappingNumberOfE

This field displays the number of port mappings on this link.

ntries

 

 

 

15.14.2 Port Mapping Table

Use the PortMapping screen to view the port mapping instance for the WAN PPP connection. Refer to Section 11.2.4 on page 132 for other field descriptions.

1Select a registered device in the Device List window and click InternetGatewayDevice > WANDevice.

2Click a number and WANConnectionDevice.

3Click a number and WANPPPConnection.

4Click a number and PortMapping to display the screen as shown.

Figure 128 TR-069: WAN Device: WANPPPConnection: PortMapping

15.14.3 Port Mapping Table Details

Use the detailed PortMapping screen to configure the port mapping settings for the WAN PPP connection.

1Select a registered device in the Device List window and click InternetGatewayDevice > WANDevice.

2Click a number and WANConnectionDevice.

3Click a number and WANPPPConnection.

4Click a number and PortMapping.

5Click a number to display the screen as shown.

194

 

Vantage Access User’s Guide