Chapter 23 STB Service

Figure 458 TR-135: STBService: ServiceMonitoring: MainStream HighLevelMetricStats

23.6.18 Main Stream High Level Metric Sample Statistics Details

You can view information about each Main Stream instance’s high level metric statistics during the sample interval in the detailed HighLevelMetricStats screen.

1Select a registered device in the Device List window and click Data Model > Device > Services > STBService.

2Click a number and ServiceMonitoring.

3Click MainStream, then click a number to display the screen.

4Click Sample, then click HighLevelMetricStats.

5Click a number to display the screen.

Figure 459 TR-135: STBService: ServiceMonitoring: MainStream HighLevelMetric Details

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 275 TR-135: STBService: ServiceMonitoring: MainStream HighLevelMetric Details

PARAMETER NAME

VALUE

MetricName

This displays the name associated with the high-level metric.

 

 

Metric1Threshold

This displays the value controlling the of the Metric1Failures parameter.

 

 

Metric2Threshold

This displays the value controlling the of the Metric2Failures parameter.

 

 

SampleSeconds

This displays the number of seconds during which this high level metric’s data

 

was collected, for this AV stream, during the sample interval.

 

 

Metric1

This displays a high level metric calculated for this AV stream during the

 

sample interval. A lower value represents an inferior QoE than a higher value.

 

 

Metric2

This displays a second high level metric calculated for this AV stream during

 

the sample interval. A lower value represents an inferior QoE than a higher

 

value.

 

 

 

467

Vantage Access User’s Guide