Chapter 23 STB Service

Figure 404 TR-135: STBService: Components: IP: IGMP

The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.

Table 236 TR-135: STBService: Components: IP: IGMP

PARAMETER NAME

VALUE

Enable

This displays whether IGMP is enabled or disabled.

 

 

Status

This displays the status of IGMP support.

 

 

MaximumNumberOfC

This displays the maximum number of group memberships allowed

oncurrentGroups

simultaneously.

 

 

MaximumNumberOfTr

This displays the maximum number of groups for which

ackedGroups

statistics will be tracked.

 

 

LoggingEnable

This displays whether IGMP traffic logging is enabled.

 

 

DSCPMark

This displays the DiffServ code point to be used for outgoing IGMP packets.

 

 

VLANIDMark

This displays the VLAN ID to be used for outgoing IGMP packets.

 

 

EthernetPriorityMark

This displays Ethernet priority code to be used for outgoing IGMP packets.

 

 

ClientVersion

This displays the highest IGMP version supported by the IGMP Client.

 

 

ClientRobustness

This displays how vulnerable the network is to lost packets.

 

 

ClientUnsolicitedRepo

This displays the number of seconds between repetitions of a host’s initial

rtInterval

report of membership in a group.

 

 

ClientGroupNumberOf

This displays the number of entries in the ClientGroup table.

Entries

 

 

 

ClientGroupStatsNum

This displays the number of entries in the ClientGroupStats table.

berOfEntries

 

 

 

23.3.16 Front End Client Groups

You can view front end client groups in the ClientGroup screen.

 

429

Vantage Access User’s Guide