ZyXEL Communications vantage access manual 239

Chapter 17 LAN Device

Table 93 TR-098: LAN Device: WLANConfiguration (continued)

PARAMETER	VALUE
NAME
Channel	This field displays the wireless channel number (0 to 255) to use for transmission.
SSID	This field displays the name (up to 32 characters) to identify the wireless network.
BeaconType	This field displays the WLAN security mode for wireless transmission.
	Select None to disable wireless security.
MACAddressContr	This field displays 1 to indicate that traffic with the specified MAC addresses is
olEnabled	allowed on this port. You can specify the MAC addresses in the
	LANHostConfigManagement screen (refer to Section 17.2 on page 230).
	0 means the MAC address control feature is disabled. All traffic is allowed
	through the USB interface on the LAN.
Standard	This field displays the wireless standard in which the device is currently
	operating.
WEPKeyIndex	This field displays the index number (1 - 4) of the WEP key the device is to use for
	data encryption.
KeyPassphrase	This field displays the passphrase the device uses to generate the WEP keys.
WEPEncryptionLe	This field displays the wireless encryption level supported on the device.
vel
BasicEncryptionMo	This field is applicable when you select a basic security option for the
des	BeaconType field.
	WEPEncryption means the device is set to use basic WEP encryption for
	wireless transmission.
	None means WEP encryption is disabled. In this case, traffic sent through the
	wireless network is not secure.
BasicAuthenticatio	This field is applicable when you select a basic security option in the
nMode	BeaconType field.
	EAPAuthentication enables user authentication before wireless connection is
	allowed for the WLAN clients.
	None deactivates this feature. In this case, your wireless network may be
	accessible by anyone.
WPAEncryptionMo	This field is applicable when you select a WPA security option in the BeaconType
des	field.
	This field displays the encryption method to secure traffic over the wireless
	network.
WPAAuthentication	This field is applicable when you select a WPA security option in the BeaconType
Mode	field.
	This field displays the authentication method to control access to your wireless
	network.
IEEE11iEncryption	This field is applicable when you select an 11i security option in the BeaconType
Modes	field.
	This field displays the encryption method to secure traffic over the wireless
	network.
IEEE11iAuthenticat	This field is applicable when you select an 11i security option in the BeaconType
ionMode	field.
	This field displays the authentication method to control access to your wireless
	network.
PossibleChannels	This field displays wireless channels available for your device as defined by the
	regulatory body.

	239
Vantage Access User’s Guide