Chapter 14 LAN Device
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 39
PARAMETER | VALUE | |
NAME | ||
| ||
Enable | This field displays 1 to indicate that the LAN Ethernet interface is active. | |
| 0 indicates the LAN Ethernet interface is disabled. In this case, no connection is | |
| allowed. | |
|
| |
Status | This field displays the connection status of the Ethernet interface. | |
|
| |
MACAddress | This field displays the MAC address of the Ethernet interface. | |
|
| |
MACAddress | This field displays 1 to indicate that traffic with the specified MAC addresses is | |
ControlEnable | allowed on this port. You can specify the MAC addresses in the | |
d | LANHostConfigManagement screen (refer to Section 14.2 on page 154). | |
| This field displays 0 to indicate that MAC address control is disabled. All traffic is | |
| allowed through the LAN interface. | |
|
| |
MaxBitRate | This field displays the connection speed in megabits per second (Mbps). | |
| Auto | |
| obtain the connection speed that both ends support. | |
|
| |
DuplexMode | This field displays the duplex mode for the connection. | |
| Auto allows the port to negotiate with a peer port automatically to obtain the duplex | |
| mode that both ends support. | |
|
|
The Stats screen shows the statistics on the LAN interface.
1Select a registered device in the Device List window and click InternetGatewayDevice > LANDevice.
2Click a number and LANEthernetInterfaceConfig.
3Click a number and Stats.
Figure 86
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for other field descriptions.
Table 40
PARAMETER | VALUE | |
NAME | ||
| ||
BytesSent | This field displays the number of transmitted bytes on this interface. | |
|
| |
BytesReceive | This field displays the number of received bytes on this interface. | |
d |
| |
|
|
158 |
| |
Vantage Access User’s Guide |
| |
|
|
|